• 2_pic_1
  • 1_pic_1
  • Flow rate exceeds the requirements of NFPA
  • 100% Pressure testing of each outlet and cleaned for medical gas service
  • Indexed to eliminate interchangeability of gas services
  • Universal rough-in assembly to accept Quick
  • Connects or DISS front adapters (Can be interchanged at any time)


General Specifications:
The medical gas Retro-Fit outlet shall be an Amico Alert-1 series.

Outlets shall be equipped with a primary and secondary check valve for positive pressure for gas services. The secondary check valve shall be rated at a maximum of 200 psi [1,379 kPa] in the event the primary check valve is removed for maintenance. Outlet bodies shall be gas-specific by indexing each gas service to a gas specific single pin indexing arrangement on the respective identification module. A large, color-coded front plate shall be used for ease of gas identification and aesthetic appeal.

A one piece chrome trim plate shall frame the outlet.  The latch-valve assembly shall be Ohmeda Diamond™ Quick  Disconnect or DISS depending on the type ordered. Amico products comply with NFPA-99.