NFPA 99-Compliant Medial Gas Manifolds

NFPA 99-Compliant Medical Gas Manifolds

Hospital Facility Services offers fully automatic, NFPA 99-compliant Amico medical gas outlets for commonly used media, including oxygen, nitrous oxide (N2O), carbon dioxide (CO2), nitrogen, and medical air.
Request a quote on NFPA 99 medical gas manifolds for your facility, or contact us to learn more.

Amico Medical Gas Outlets

Amico’s medical gas manifolds consist of two bank regulators (dome bias) that are used to reduce cylinder pressure to the two line regulators, which in turn control the final line pressure. Manifolds feature an intermediate and a line relief valve which is internally connected to a common vent port and terminates in a 1/2” (13 mm) FNPT pipe.
These fully automatic medical gas manifolds switch from the main supply to the reserve supply with no fluctuation in the final line pressure. After the switchover, the reserve bank becomes the “In Use” supply and vice-versa.
The control panel is mounted on the front of the cabinet, and includes a line gauge and two bank gauges, as well as six LED monitor lights: two green LEDs for “Bank In Use,” two yellow for “Bank Ready,” and two red for “Bank Empty.”
These compact units measure just 19” high x 17” wide x 9” deep (483 mm x 432 mm x 229 mm).

Contact Us for High Performance Medical Gas Manifolds

We have the right medical gas outlet for your application. Use the configurator below to find the model you need, request a quote, or contact Hospital Facility Services for more information.
Please note: Users must also order a medical gas header bar with pigtails (sold separately). Please specify total length requirements when ordering.
  • Heater: NO
Price Each: Call for Price

Features & Benefits of Amico Medical Gas Outlets

  • Medical gas manifold for oxygen, nitrous oxide (N2O), carbon dioxide (CO2), nitrogen, medical air
  • One of the most common and trusted medical gas manifolds in hospitals across the United States
  • NFPA 99 compliant
  • Fully automatic with dual line dome loaded regulators, dry contact to send change-over signal to a master alarm panel (required per NFPA 99)
  • No moving parts or shuttle valves for reliable performance with low maintenance requirements
  • Input power 110 VAC to 240 VAC, 50 to 60 HZ
  • Control panel incorporates six LEDs that act as a local signal; when illuminated, LEDs are noticeable even in poor lighting conditions
  • 3/4" (19 mm) isolation valve for supply line
  • Includes wall mounting bracket
  • Removable cabinet enclosure for easy installation and service

Flow Capacity

  • Carbon dioxide: 4,500 SCFH (2,123 L/min)
  • Nitrogen & instrument air: 6,000 SCFH (2,831 L/min)